15 replies to this topic

[josevador]

Hello, im jerome from france, i just buy a massey fergusson model : mf 832 serial 1870702575, and i m looking for some manuels to repair it.
It's hard for me navigate in the forum and make a search whith my level of english, so if u please to give me the link to doawnload it.

Thx for helping me.

[MH81]

Jerome,
It seems the MF832 is a smaller Rear Engine Riding mower. At this time, we do not seem to have that manual. There are at least one member who owns one here, maybe someone has a manual and can help you. I assume you mean the service manual?

to GTTalk

[IamSherwood]

Hi Jerome
I have a manual for the MF832, but have no way to scan it, and post it to the manuals section.
I can take pictures of the manual, and post them on the thread here. Let me know what areas
of the tractor you need to fix.
"Stoneman" also has a MF832. Not sure if he has a downloadable manual.
Welcome to GTT, and also, we would sure like to see some pictures of your 832.

[Stoneman]

Sorry, but i don't have any manuals for the 832 either (on my list of things to do...)

Welcome josevador. I too would like to see pictures of your 832. If you have any questions i'm pretty sure we can awnser them.

[KennyP]

Will, how many pages to this manual? If not too many, might be able to make them a Word .doc and go that way. Or convert to .pdf once it is put together. I have a .jpg to .pdf converter.

[IamSherwood]

Will, how many pages to this manual? If not too many, might be able to make them a Word .doc and go that way. Or convert to .pdf once it is put together. I have a .jpg to .pdf converter.

So Kenny, if I email you good .jpg pics, you could convert to pdf, and upload to GTT database?

[MH81]

So Kenny, if I email you good .jpg pics, you could convert to pdf, and upload to GTT database?

Yeah, that's not a problem. Even if you post them in the thread, someone can do it. Email would be better, as it wouldn't go thru the resized tho.

[KennyP]

Will, I'd be 'willing' to try.
Oops! Just checked the converter and my 'trial' has expired. Here's a link to it:
JPG to PDF Converter | Convert JPEG to PDF in Batch | JPG to PDF Conversion
If you get your pics ready, then download the converter and get it done, you wouldn't have to e-mail them to someone to do it. Worth a try, Will.

[MH81]

Yeah, Kenny's right Will... The converters work pretty well. If you have any of the newer versions of Open Office or M$office, you can put the pics into a document and tell it to export as a PDF. Sounds harder than it is. Really.

[josevador]

Thanks all to pay attention for my research, someone of a french website will send me the manual in french soon, ihope he' will do it, if you want i c'an post it here. i'll take it to if post it there even in english.

Someone ask me some pictures of my mower he they are :
JOSE..

[MH81]

Looks like a nice 832. Thanks for the picture.

[ducky]

Thanks all to pay attention for my research, someone of a french website will send me the manual in french soon, ihope he' will do it, if you want i c'an post it here. i'll take it to if post it there even in english.

Someone ask me some pictures of my mower he they are : [ATTACH=CONFIG]18109[/ATTACH]
JOSE..

Thanks for the pic. over here that is an MF 5 or 6????
Some pics of the one my boy Brad found.

Attached Thumbnails

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

[IamSherwood]

MF offered the MF5, which had a 26" cut, the MF6 which had 2 blades, and cut 32". They also offered the MF832, 8hp and twin blade 32" cut.
At some point they got rid of the MF6, and offered the MF626. Single blade, 26" cut. Perhaps the 32" cut was too much for the Tec V60.
Here's pics of my 5,6, and 832. The 6 is restod, and I'm half way through the 5. The 832 works/runs great, just needs a bit of prettying.
Running boards, rims etc. Oh yeah, the 832 was offered with optional electric start, which is on mine.(Goody-I hate pull starts) I've only seen a couple of the 626's out
there, and they're always too far away.

Attached Thumbnails

• 
• 
• 

[DH1]

You guys got some good looking little ride ons there.
Is it true that you can stand these up on end, the rear end, for storing them?

[Stoneman]

You guys got some good looking little ride ons there.
Is it true that you can stand these up on end, the rear end, for storing them?

Yup. snapper RER's do the same thing too