let me take a look at my manuals..... It may be 2-3 days till I can get back with you and see if I have anything.
been real busy here the past few weeks.....
Posted May 06, 2014 - 08:08 PM
let me take a look at my manuals..... It may be 2-3 days till I can get back with you and see if I have anything.
been real busy here the past few weeks.....
Posted September 22, 2014 - 08:54 PM
Looking for any kind of manuals or info on model 942 fs-11 by stiga.
Have just acquired one and it needs a drive belt and the steering cable ? tightened up.
Know the drive belt is 37 Inches but not a lot of info on the (2) 42 inch deck belts,
one from the motor to the center or the one from center to the deck.
Posted September 23, 2014 - 04:58 AM
Looking for any kind of manuals or info on model 942 fs-11 by stiga.
Have just acquired one and it needs a drive belt and the steering cable ? tightened up.
Know the drive belt is 37 Inches but not a lot of info on the (2) 42 inch deck belts,
one from the motor to the center or the one from center to the deck.
I just bought a manual for this machine so we can get some part numbers for you. When it comes in I will let you know
Posted September 23, 2014 - 08:20 AM
Posted photo's of my machine.
In the process of tightening it up and putting the belts back on today
if I can find suitable replacements, converting 940 manual part numbers
to updated belt lengths.
From what I see so far they are standard length belts not metric.
Posted September 23, 2014 - 09:59 AM
If you can wait until the manual comes in I'll upload it to the site.
After so many people have been asking me for the 942 manual I decided to overpay for one so we can all have a copy
Sometimes special 1/2 lengths of belts were used, I may even have the belts instock once we get the numbers.
Posted September 23, 2014 - 10:09 AM
Cool will throw the drive belt back on and put it back in storage till it comes.
Thanks.
Posted September 25, 2014 - 03:04 PM
B1000
YOU ARE RIGHT IT IS A 36.5 INCH BELT.
ARIENS MAKES THEM IN KEVLAR, 72108 IS THE PART NUMBER.
Posted September 25, 2014 - 03:33 PM
Did you find a partslist?
Posted September 25, 2014 - 07:18 PM
Used the manual * from the web measured the belt out at 37 and it slips in anything other than 1st and 2nd gear *(model 940 fs11downloaded).*
Cross checked old dealers parts # records and found 2 belts on e-bay with that number with OEM parts Stiga stamped on it, $130.00 for one belt.
Cross referenced belts by length for lawn equipment and found one from Ariens (72108 Kevlar belt 36.5 inch) for their 10hp snow blower.
But haven't worked on it yet been rearranging the yard a bit to get ready for my GT5000 Craftsman snow-chains to arrive in a few days,
have to finish it up before I get back to work on the house.
Posted April 17, 2015 - 10:18 AM
Did you find a partslist?
No haven't found the right parts list for this machine but did get an original stiga belt of of e-bay
for the drive line for $20 with shipping.
Posted April 17, 2015 - 10:20 AM
Sorry should of said fs-11 model 942 belt looking for the manual still.