cultivator with 5 teeth - any info would be great
Posted September 17, 2011 - 05:08 PM
It's not very big - probably about 2' across and about 2'6" long.
There are two lower arms and the top arm looks like it may have been designed to slide on the top rail. It's pointing up, but will easily swivel to a horizontal position.
There are some markings - but not really clear enough to read. The last two digits look like 8s in the picture, but could be 6s.
Would this be for a GT or a 2-wheel tractor?
Posted September 17, 2011 - 05:18 PM
Posted March 21, 2013 - 06:54 PM
i don't know why that reminds me of a IH super c mid mount cultivator left side set . the old super c offset tractors with 2 point hitch used a similar style but the one i used on the farm had a narrow left and a center and a narrow right that hung from an attachment bar with a lift bar that went all the way across and used a similar lift arm that bolted on . but that was years ago and alot of booze later oh i mean pops later so my memory may not be correct.