Jump to content

Garden Tractors and Parts on eBay



Photo
- - - - -

Riding Mower or Small Tractor Rear End - $25 (Coventry Conn)


  • Please log in to reply
1 reply to this topic

#1 boyscout862 ONLINE  

boyscout862
  • Senior Member
  • Contributor
  • Member No: 8923
  • 13,688 Thanks
  • 9,474 posts
  • Location: N.E. Connecticut

Posted March 01, 2018 - 10:59 PM

I don't want this but am posting it for someone to identify and if someone needs it. I suspect that it is for a Baird Tractor but it could be for anything from the good old days. Good Luck, Rick

 

https://newlondon.cr...6514469724.html

 

Riding Mower or Small Tractor Rear End - $25 (Coventry Conn)

<image 1 of 3>
00b0b_gHVPpbvRmxR_600x450.jpg
 
 
00b0b_gHVPpbvRmxR_50x50c.jpg00M0M_kSHccGMWwFh_50x50c.jpg00D0D_4Rv0j2VuFhj_50x50c.jpg
condition: good

 

This is a rear end for a small tractor or large riding mower. It measures 42" wide from wheel flange to wheel flange. The center section is made of cast iron and the axle tubes are made of heavy wall tubing. It has a lever to put it into forward and into reverse. There is a keyed shaft to attach a pulley or sprocket to transmit power from a motor. Seems to be in good condition.

Please CALL between 8:30 AM and 8:30 PM. 8six0 9nine2 5four3seven. Because of scams, please do not e-mail me, CALL.



#2 secondtry OFFLINE  

secondtry
  • Senior Member
  • Member No: 83632
  • 2,233 Thanks
  • 1,578 posts
  • Location: Washington State

Posted March 02, 2018 - 12:13 AM

I don't want this but am posting it for someone to identify and if someone needs it. I suspect that it is for a Baird Tractor but it could be for anything from the good old days. Good Luck, Rick

 

https://newlondon.cr...6514469724.html

 

Riding Mower or Small Tractor Rear End - $25 (Coventry Conn)

<image 1 of 3>
00b0b_gHVPpbvRmxR_600x450.jpg
 
 
00b0b_gHVPpbvRmxR_50x50c.jpg00M0M_kSHccGMWwFh_50x50c.jpg00D0D_4Rv0j2VuFhj_50x50c.jpg
condition: good

 

This is a rear end for a small tractor or large riding mower. It measures 42" wide from wheel flange to wheel flange. The center section is made of cast iron and the axle tubes are made of heavy wall tubing. It has a lever to put it into forward and into reverse. There is a keyed shaft to attach a pulley or sprocket to transmit power from a motor. Seems to be in good condition.

Please CALL between 8:30 AM and 8:30 PM. 8six0 9nine2 5four3seven. Because of scams, please do not e-mail me, CALL.

    Looks a lot like the rear of my National mower. Except the lever on the side of that one is two speed forward with no reverse  Don


Edited by secondtry, March 02, 2018 - 12:16 AM.

  • CRFarnsworth and boyscout862 have said thanks




Top