Jump to content

Garden Tractors and Parts on eBay



Photo
- - - - -

Rusty Massey Ferguson 10


  • Please log in to reply
5 replies to this topic

#1 DMAX ONLINE  

DMAX

    Addicted

  • Site Supporter
  • -GTt Supporter-
  • Member No: 264
  • 570 Thanks
  • 227 posts
  • Location: Eighty Four, Pa

Posted October 22, 2017 - 07:45 PM

I picked up this 10 yesterday. A friend of mine found it and sent me pictures almost two years ago and asked if I was interested. It says Massey on it so yes I was! From the pictures he sent I was pretty sure that it had the aluminum dash and nose cone. So time passed and I kept asking him about it, finally we were able to go check it out and yes it's an early 10 with the aluminum pieces. So yesterday I went to get it. It's rough but at least it isn't going to the scrap yard or end up deteriorating away to nothing. The fenders were off it and the shifter was pulled out of the transmission but I didn't really pay much attention to it. I just figured the fenders rusted off of it. It wasn't until I got home that I noticed the crack and big hole in the transmission. I'm not sure what I going to do with it yet. I'm considering getting it running and leaving the rusty look or just parts. But I keep adding more and more tractors to my "get to" list. Anyways I'm happy with my purchase, it's still neat that it's around after 51 years. I didn't get a good picture but the steering cap is actually in pretty good shape compared to everything else, it's not all yellowed and is clear.

Attached Thumbnails

  • IMG_2526.JPG
  • IMG_2527.JPG
  • IMG_2530.JPG
  • IMG_2523.JPG
  • IMG_2524.JPG
  • IMG_2528.JPG

  • DH1, limebuzz, KennyP and 6 others have said thanks

#2 DH1 OFFLINE  

DH1

    Electric Tractors

  • Senior Member
  • Contributor
  • Member No: 62
  • 5495 Thanks
  • 5633 posts

Posted October 22, 2017 - 08:11 PM

If that was mine I'd change the trany with a good one, get it running and leave it as rusty as it is.


  • DMAX and boyscout862 have said thanks

#3 KennyP ONLINE  

KennyP

    FORDoholic

  • Super Moderator
  • Staff
  • -GTt Supporter-
  • Contributor
  • Member No: 2253
  • 50023 Thanks
  • 52249 posts
  • Location: Collinsville, Oklahoma

Posted October 23, 2017 - 06:36 AM

If that was mine I'd change the trany with a good one, get it running and leave it as rusty as it is.

I'm with Doug. Should be plenty of those trannys about.


  • DMAX and boyscout862 have said thanks

#4 mac102004 ONLINE  

mac102004

    Tractorholic

  • Senior Member
  • Contributor
  • Member No: 1420
  • 596 Thanks
  • 610 posts
  • Location: Cape Breton, NS

Posted October 23, 2017 - 10:53 AM

i'll buy that nose piece lol


  • DMAX said thank you

#5 DMAX ONLINE  

DMAX

    Addicted

  • Site Supporter
  • -GTt Supporter-
  • Member No: 264
  • 570 Thanks
  • 227 posts
  • Location: Eighty Four, Pa

Posted October 24, 2017 - 04:48 PM

I'm going to get it going one way or another. I have a parts tractor that doesn't have a motor and is very rough. I'm going to pull the rearend out of it for this one. It'll be a while before I get to it, I've already committed myself to few other tractors. But maybe I can spend a little time to see if I can get the engine going. I think I'll hang on to the nose piece! lol. If it wasn't for that and the dash I probably wouldn't of got it. But thanks for the offer!
  • mac102004, KennyP and KBuzz have said thanks

#6 DMAX ONLINE  

DMAX

    Addicted

  • Site Supporter
  • -GTt Supporter-
  • Member No: 264
  • 570 Thanks
  • 227 posts
  • Location: Eighty Four, Pa

Posted October 24, 2017 - 04:50 PM

Here's the parts tractor. I got it for free.

Attached Thumbnails

  • IMG_0807.JPG

  • limebuzz, KennyP and KBuzz have said thanks




Top