Hey Guys Please read.
I have more projects then I have time, so I need to get some stuff gone. I got this out of a barn the way it is and since i have owned it, it has been covered The original 14 hp threw a rod and he took another engine a 16 hp from a 1616 for a swap and due to health reasons never put it back together. I never heard the engine run it but has compression. Probably going to have to go through the carb, the basic stuff from a tractor sitting. what i can tell everything is there to put it back together, clutch pressure plate etc etc. both trannys are free but the front one has an issue with the end of the stick, the finger is wore and lets it get stuck. It comes with 2 decks a 48" and a 60" but no mule drive. All of the spindles on both decks move free with no noises. the 48" is in pretty good shape from what i can tell. the 60" is rough shape but usable. I have no other attachments to go with this. does come with a few extra parts, extra dash, the old engine and an extra pressure plate.
#1 needs new front tires, they are shot but will hold air to move, the back are starting to weather crack but have really good tread.
#2 on the transmission closet to the engine, i opened the case and all of the gears look good, just the end is wore on the stick and wants to get stuck. which brings me to #3
#3 someone cut the tranny cover to get access to the tranny. i have the piece to be welded back on the tunnel cover as shown in the pictures
any questions or more info send me a pm
thanks for looking