Jump to content

Garden Tractors and Parts on eBay



Photo
- - - - -

H11XL Find?


  • Please log in to reply
6 replies to this topic

#1 Moe S OFFLINE  

Moe S
  • Member
  • Member No: 84233
  • 5 Thanks
  • 7 posts
  • Location: Hurleyville, NY

Posted August 10, 2016 - 12:39 PM

Hi all I'm new to the group and new to Bolens. I came across a model 1058 in nice overall shape with about 2900 hours. the deck needs serious help and I hope to find a replacement somewhere or I'll need to do some fabricating(only good things are the spindles and pulleys). I was repowered with a Briggs 18hp I/C Plus and conversion looks well done. I see very little about this model. Any thoughts or comments? Any ideas on removing steering wheel to replace upper bushing? It's seized to the shaft. Roll pin came out though.

 

Thanks in advance.



#2 boyscout862 ONLINE  

boyscout862
  • Senior Member
  • Member No: 8923
  • 11,250 Thanks
  • 8,349 posts
  • Location: N.E. Connecticut

Posted August 10, 2016 - 01:21 PM

Welcome to GTT. Check our Manuals Section for info. Search CL for the deck. I've seen several Bolens decks for sale in my area but don't know what madels they fit. When asking questions, post some pics that show the situation to make it clear to us. Good Luck, Rick


  • Moe S said thank you

#3 Paulgo OFFLINE  

Paulgo
  • Senior Member
  • Member No: 68759
  • 652 Thanks
  • 416 posts
  • Location: Sault Ste Marie, MI

Posted August 10, 2016 - 03:20 PM

The H11XL was under powered, but used the same transmission as the other XL's with bigger engines. I have repowered them myself and put them back to work. All Bolens Medium frames (XL series and 1600/1700 Eliminators) used the same attachments. Common and easy to find. Stuff from tube frames, Q's, St's, and large frames won't work. Good luck, Paul.


Edited by Paulgo, August 10, 2016 - 03:22 PM.

  • Moe S said thank you

#4 crittersf1 OFFLINE  

crittersf1

    GT Lunatic

  • Senior Member
  • Member No: 26142
  • 4,190 Thanks
  • 5,783 posts
  • Location: Newport, N.C.

Posted August 10, 2016 - 03:29 PM

:welcometogttalk: :camera:


  • Moe S said thank you

#5 Paulgo OFFLINE  

Paulgo
  • Senior Member
  • Member No: 68759
  • 652 Thanks
  • 416 posts
  • Location: Sault Ste Marie, MI

Posted August 10, 2016 - 03:32 PM

Many mistakes on here, so take the info with caution, but good site to browse--  http://www.tractorda...lens-h11xl.html



#6 blackjackjakexxix OFFLINE  

blackjackjakexxix

    Blackjackjakexxix

  • Senior Member
  • Member No: 2194
  • 2,691 Thanks
  • 1,972 posts
  • Location: Pulaski,Pa 16143

Posted August 10, 2016 - 03:53 PM

As for the steering wheel,lots of PB blaster,and a good puller,they can be a real bugger to get of
  • Moe S said thank you

#7 chieffan ONLINE  

chieffan
  • Senior Member
  • Contributor
  • Member No: 62695
  • 8,099 Thanks
  • 5,653 posts
  • Location: SW Iowa

Posted August 10, 2016 - 04:00 PM

May have to get the blue wrench out to get the steering wheel off.  Heat the part that goes over the shaft on one side only or you will swell the shaft as well.  Good luck.


  • Moe S said thank you




Top