Jump to content

Garden Tractors and Parts on eBay

- - - - -

MF gc2300 snowblower electric chute and deflector

  • Please log in to reply
2 replies to this topic

#1 massey driver ONLINE  

massey driver

  • Senior Member
  • -GTt Supporter-
  • Contributor
  • Member No: 75
  • 1,431 Thanks
  • 1,578 posts
  • Location: Mainitoba Canada

Posted March 23, 2010 - 07:23 PM

After mounting the snowblower onto my gc2300 I converted the chute turner to a electric turner by using a small 1000lb winch.I also made the chute deflector into electric as well.I used a electric window motor and actuator out of a 1970 chev car.I picked the motor and actuator up from the auto wrecker's for $25.It was very easy to do as the deflector pivots somewhere in its middle so it was easy to mount it to the deflector.I mounted the electric motor on a piece of plate that I had laying around and just bolted it onto the side of the chute.The switches are mounted inside the cab near the joy stick.I used momentary switches,the one closest to the window is for the deflector,the one further away is for the winch.It works really good,haven't had any problems with this set up at all.Larry

Attached Thumbnails

  • Digital camera pi&.jpg
  • Digital camera pi&.jpg
  • Digital camera pi&.jpg
  • Digital camera pi&.jpg
  • Digital camera pi&.jpg

  • GT225 said thank you

#2 Bill56 OFFLINE  



  • Senior Member
  • Member No: 60
  • 840 Thanks
  • 2,179 posts
  • Location: N. E. Illinois

Posted March 23, 2010 - 08:30 PM

Nice set up! Looks like that should work very well.



    Lost in Cyber Space

  • Admin
  • Staff
  • -GTt Supporter-
  • Contributor
  • Member No: 3
  • 10,344 Thanks
  • 15,621 posts
  • Location: Pennsylvania

Posted March 28, 2010 - 09:59 AM

You guys never cease to amaze me with your ingenuity. :thumbs: