Jump to content

Time to Enter Tractor of the Month!
Garden Tractors and Parts on eBay



Photo
- - - - -

Need 18086 3point plans


  • Please log in to reply
5 replies to this topic

#1 Jwangelin OFFLINE  

Jwangelin
  • Member
  • Member No: 62756
  • 6 Thanks
  • 8 posts
  • Location: WNY

Posted July 26, 2016 - 07:05 AM

Hi, I've seen early HT plans (18010) for a DIY 3 point hitch. Does anyone have plans for fabbing a 18086 3 point hitch for my HT-20?

Thanks in advance,
Jon

#2 boyscout862 OFFLINE  

boyscout862
  • Senior Member
  • Member No: 8923
  • 10,326 Thanks
  • 7,816 posts
  • Location: N.E. Connecticut

Posted July 26, 2016 - 09:32 AM

Check in our Manuals Section. They might be in several places so, you will have to hunt. Good Luck, Rick



#3 stiemmy ONLINE  

stiemmy
  • Senior Member
  • Contributor
  • Member No: 53712
  • 1,582 Thanks
  • 1,301 posts
  • Location: Freekin cold central WI

Posted July 26, 2016 - 04:19 PM

Hi, I've seen early HT plans (18010) for a DIY 3 point hitch. Does anyone have plans for fabbing a 18086 3 point hitch for my HT-20?
Thanks in advance,
Jon


Unless you have the tools to make some of those parts, you may also consider this...
https://www.neatfarm...tch-Kits/11/108
  • blackjackjakexxix and WrenchinOnIt have said thanks

#4 sodisr OFFLINE  

sodisr
  • Senior Member
  • Member No: 9153
  • 660 Thanks
  • 770 posts
  • Location: kenosha Wi

Posted July 27, 2016 - 11:14 AM

Not a bad price.. Steimmy..  I made mine for a 1447 and the time,, material,, and getting it to work.. I think I would have been just far enough ahead to buy one..



#5 LPBolens OFFLINE  

LPBolens

    Tractorholic

  • Senior Member
  • -GTt Supporter-
  • Contributor
  • Member No: 874
  • 1,233 Thanks
  • 904 posts
  • Location: North Central Illinois

Posted July 28, 2016 - 10:47 AM

The support blocks that are used in the end of the frame rails on the later Large Frame tractors seem to be the stopper for most folks. I have never actually seen one personally, but I understand that Sam's Bolens has a reproduction version of the 18086.
  • blackjackjakexxix and WrenchinOnIt have said thanks

#6 WrenchinOnIt OFFLINE  

WrenchinOnIt
  • Senior Member
  • -GTt Supporter-
  • Contributor
  • Member No: 8592
  • 2,696 Thanks
  • 780 posts

Posted July 31, 2016 - 08:22 AM

The support blocks that are used in the end of the frame rails on the later Large Frame tractors seem to be the stopper for most folks. I have never actually seen one personally, but I understand that Sam's Bolens has a reproduction version of the 18086.

Someone here or over on MTF fabbed up a set for the Large Frames by welding flat stock with the proper sized bushing thru it ,pretty sure it was a MTF post.

Here's something : http://www.mytractor...-cad-model.html

Member here Classic Bolens has a set on eBay for sale : http://www.ebay.com/...isAAOSwUdlWclk7

Also here or on MTF there were a couple complaints about the ones from Sam's as far as fitment, not to be casting aspersions Sam's stuff is legit, but I'd certainly research and inquire.

Edited by WrenchinOnIt, July 31, 2016 - 08:28 AM.

  • blackjackjakexxix and Clevis have said thanks




Top