Crafts man lawnmower pullie switch
Posted May 09, 2016 - 03:49 PM
- frankiesk16 said thank you
Posted May 09, 2016 - 06:02 PM
Don't tell us this is going to be a "RACER" lawnmower! Why and what pulley needs changed?
- Lawnboy said thank you
Posted May 09, 2016 - 09:40 PM
Posted May 09, 2016 - 10:11 PM
The 502.xxxxx designation will tell you it was made by Murray. Recheck your digits after the 502. There should be 5 digits with no point in those 5 digits.
Most of those Murray made tractors used a 11HP Briggs & Stratton verticle motor, some with a 3/4" shaft and others with a 1" shaft. They used a stack pulley that drove on the upper pulley while the mower deck was belted off the lower pulley.
Making a racer from the existing machine is not advised without changing the right angle gearbox and the transmission, let alone the machine is so light on the front it will already do wheelies starting in second gear.
Edited by MyBolens1053, May 09, 2016 - 10:15 PM.
Posted May 11, 2016 - 02:41 PM