Broke an axle on my 1981 Simplicity 4211 Saturday. Got the transaxle out yesterday and split the case on the transaxle. Both axle shaft needle bearings are shot! Actually there were only 8 full size needles and a some busted up needles from both bearings. I'd like to replace the whole transaxle if I can find one in decent shape. I thought I would post something here and in the WTB forum to get more exposure. Here is a link to what I need: http://gardentractor...peed-transaxle/
Snapped an axle
Posted April 26, 2016 - 10:49 PM
Posted April 27, 2016 - 05:21 AM
That just stink ! Hope you can find a part or parts tractor .
Posted April 27, 2016 - 06:42 PM
What does the transaxle look like? I have several spares but don't know what they go to. Good Luck, Rick
Posted April 28, 2016 - 12:48 PM
Posted April 28, 2016 - 08:23 PM
Here are a couple of pics. The model tag is located on the lower right side towards the front of the transaxle. Note: axle shafts were removed before I took these pics.
Tag Location - Lower RS
Edited by cadman56, April 28, 2016 - 08:25 PM.
- KennyP said thank you