Jump to content

Nominations for Tractor of the Month
Garden Tractors and Parts on eBay



Photo
- - - - -

1855 3 point hose routing question

1855 hydraulics snapper 3point

  • Please log in to reply
9 replies to this topic

#1 TheFarm2004 OFFLINE  

TheFarm2004

    Member

  • Senior Member
  • Member No: 642
  • 129 Thanks
  • 124 posts
  • Location: Lanesville, Indiana

Posted April 14, 2016 - 07:08 PM

I mounted the 3point hardware and cylinder today. The factory lines that came with it just don't seem to line up with my tractor. Do the lines run from the valve toward the back, then go through the round hole in the fender pan? That seems to be the way the steel lines are bent but the rubber lines seem to long. I got a valve off ebay that has a 90 degree elbow for the one of the lines but both of the lines that came with this kit have the 90 bent in the pipe.

Any guidance appreciated!

 


  • claudetteym16 said thank you

#2 coldone OFFLINE  

coldone

    Tractorholic

  • Senior Member
  • -GTt Supporter-
  • Contributor
  • Member No: 839
  • 1,631 Thanks
  • 1,668 posts
  • Location: Central NC

Posted April 14, 2016 - 07:49 PM

Here is the parts diagram for the 3PTH. It shows the correct orientation of the hydraulic lines.

 

https://www.partstre.../3-point-hitch/

 

They will be going on the front (engine) side of the fender pan, underneath the pan.

 

If that doesnt work for you let me know and I wil see if I can get some pics for you.


  • ducky, TheFarm2004, limebuzz and 1 other said thanks

#3 ducky OFFLINE  

ducky

    Senior Member

  • Senior Member
  • -GTt Supporter-
  • Contributor
  • Member No: 564
  • 1,623 Thanks
  • 3,860 posts
  • Location: Freedom, WI

Posted April 14, 2016 - 09:47 PM

It also matters the order they are installed.  They run over the top of one another and this makes a differences as to how they fit.

They also have to be removed and installed in the correct order or they turn into a rat nest.


Edited by ducky, April 14, 2016 - 09:48 PM.

  • TheFarm2004 said thank you

#4 ducky OFFLINE  

ducky

    Senior Member

  • Senior Member
  • -GTt Supporter-
  • Contributor
  • Member No: 564
  • 1,623 Thanks
  • 3,860 posts
  • Location: Freedom, WI

Posted April 14, 2016 - 09:51 PM

Also remember there are 2 other line that are std. and go to the mid mount cylinder.  The 3pt are optional and thread between them.


  • TheFarm2004 said thank you

#5 TheFarm2004 OFFLINE  

TheFarm2004

    Member

  • Senior Member
  • Member No: 642
  • 129 Thanks
  • 124 posts
  • Location: Lanesville, Indiana

Posted April 14, 2016 - 11:02 PM

Here is the parts diagram for the 3PTH. It shows the correct orientation of the hydraulic lines.

 

https://www.partstre.../3-point-hitch/

 

They will be going on the front (engine) side of the fender pan, underneath the pan.

 

If that doesnt work for you let me know and I wil see if I can get some pics for you.

I have the service manual that Partstree list but the lines I have don't match. the lines I have' are bent to go from the valve back towards the rear. If you could get picture of the valve to rear 3point lines[just above right rear tire] would help a great deal.

Ducky said Rats nest, thats what I am trying to avoid.


  • limebuzz said thank you

#6 TheFarm2004 OFFLINE  

TheFarm2004

    Member

  • Senior Member
  • Member No: 642
  • 129 Thanks
  • 124 posts
  • Location: Lanesville, Indiana

Posted April 14, 2016 - 11:24 PM

Also remember there are 2 other line that are std. and go to the mid mount cylinder.  The 3pt are optional and thread between them.

It's the optional part that is giving me grief!



#7 ducky OFFLINE  

ducky

    Senior Member

  • Senior Member
  • -GTt Supporter-
  • Contributor
  • Member No: 564
  • 1,623 Thanks
  • 3,860 posts
  • Location: Freedom, WI

Posted April 14, 2016 - 11:42 PM

I think parts tree is for a snapper with the Eaton hydro and the filter under the left fender.  Try Agco parts for the Massey configuration.

Look at the "Mower Lift Hydrualics" and "Lift Link" Pages


  • limebuzz said thank you

#8 coldone OFFLINE  

coldone

    Tractorholic

  • Senior Member
  • -GTt Supporter-
  • Contributor
  • Member No: 839
  • 1,631 Thanks
  • 1,668 posts
  • Location: Central NC

Posted April 15, 2016 - 05:40 AM

Yes, Partstree is for the snapper with eaton hydro.



#9 ducky OFFLINE  

ducky

    Senior Member

  • Senior Member
  • -GTt Supporter-
  • Contributor
  • Member No: 564
  • 1,623 Thanks
  • 3,860 posts
  • Location: Freedom, WI

Posted April 26, 2016 - 01:01 PM

Agco server seems to be down at the moment.



#10 ducky OFFLINE  

ducky

    Senior Member

  • Senior Member
  • -GTt Supporter-
  • Contributor
  • Member No: 564
  • 1,623 Thanks
  • 3,860 posts
  • Location: Freedom, WI

Posted April 27, 2016 - 10:09 AM

Found out Agco Parts does not work in Vivaldi.

Here are the Massey Pics.

This is the 3 PT routing.

Attached File  mozilla.pdf   2.2MB   44 downloads

This is the other tubing.

Attached File  mozilla1.pdf   2.03MB   30 downloads


  • TheFarm2004 and limebuzz have said thanks





Also tagged with one or more of these keywords: 1855 hydraulics, snapper, 3point

Top