Jump to content

Nominations for Tractor of the Month
Garden Tractors and Parts on eBay



Photo
- - - - -

Generator Bracket on 1965 110


  • Please log in to reply
10 replies to this topic

#1 oldiron1 OFFLINE  

oldiron1
  • Senior Member
  • Member No: 43924
  • 292 Thanks
  • 182 posts
  • Location: Hartford, Wisconsin

Posted December 29, 2015 - 02:12 PM

Hi Guys,

 

I recently purchased my first vintage John Deere which I'm excited about! It's a round fender, 1965 model 110 that a guy started restoring; did a great job, got about 80% re-assembled after painting then lost interest for whatever reason and just quit.

 

Luckily he did a good job of marking bolts and other pieces but being my first experience with a green machine, it's a bit of a jigsaw puzzle that I'm trying to figure out.

 

Most of it seems pretty self explanatory however I'm having a tough time with the starter/generator. The main cast mounting bracket that bolts to the block is there and have the generator mounted to it, however I'm not sure how the stabilizer/adjustment bracket is supposed to be installed, to adjust belt tension and hold the generator still. If anyone has a picture, I'd really appreciate it.

 

Also, is there a preferred replacement fuel sediment bowl assembly that is recommended? I've bought cheap aftermarket ones in the past for other tractors, but want to ask as I see if it leaks, it's definitely going to make a mess out of the nice green paint.

 

Thanks in advance for any help and JD education! Rob

 

JD 110.jpg

JD 110 2.jpg


  • johndeereelfman, Traill95 and boyscout862 have said thanks

#2 Trav1s OFFLINE  

Trav1s

    Got points?

  • Senior Member
  • Member No: 5472
  • 2,602 Thanks
  • 3,750 posts
  • Location: Cedar Rapids, IA

Posted December 29, 2015 - 03:53 PM

http://hapcoparts.co...wlassembly.aspx - Here is the fuel bowl

 

I have not found a picture of the bracket you are looking for but I know someone else can help with that.


  • Bolens 1000, johndeereelfman, boyscout862 and 1 other said thanks

#3 Bolens 1000 OFFLINE  

Bolens 1000

    DR. Bolens

  • Staff Admin
  • Staff
  • -GTt Supporter-
  • Contributor
  • Member No: 7
  • 12,670 Thanks
  • 17,197 posts
  • Location: Western NY

Posted December 29, 2015 - 04:07 PM

The aftermarket ones linked above I sell and they work good from my experiences, I have had a few where the threads were not tapped correct but no leaks on them.

 

The genuine B&S fuel bowls which are the same as the obsolete Kohlers are pretty good as well and seem to be the best quality they have a Paddle style fuel knob though

See the difference below:

http://bolenspartsan...iment-bowl-oem/


  • KennyP, johndeereelfman, Trav1s and 2 others have said thanks

#4 johndeereelfman OFFLINE  

johndeereelfman

    Elfin Majic

  • Senior Member
  • Contributor
  • Member No: 3761
  • 5,475 Thanks
  • 2,532 posts
  • Location: Lititz, PA

Posted December 29, 2015 - 09:00 PM

Well Rob, I did a search through my pictures, and this is the best I have right now:

 

Auction Tractors 006.JPG Auction Tractors 017.JPG

 

The top piece bolts directly to the top of the coiling head shroud tin, and the front piece bolts directly to the upper piece. A bolt is pushed through the back side of the front piece, and is threaded directly into the starter generator casting. Were the upper and lower pieces attach to each other, you'll want a long enough bolt connecting them, as the starter generator shields top tab gets fastened to it as well. I'll get you a better, cleaner picture of a complete assembly set up this weekend if you have the time.

 

Good Luck, and feel free to ask anymore questions!

 


  • Bolens 1000, Trav1s, hdg4400 and 1 other said thanks

#5 Trav1s OFFLINE  

Trav1s

    Got points?

  • Senior Member
  • Member No: 5472
  • 2,602 Thanks
  • 3,750 posts
  • Location: Cedar Rapids, IA

Posted December 29, 2015 - 09:04 PM

Teh mannuh comes thru!!!


  • KennyP and johndeereelfman have said thanks

#6 oldiron1 OFFLINE  

oldiron1
  • Senior Member
  • Member No: 43924
  • 292 Thanks
  • 182 posts
  • Location: Hartford, Wisconsin

Posted December 29, 2015 - 09:38 PM

Thanks so much johndeereelfman, that's a huge help!

I sure do appreciate your time and willingness to post these pictures and description; it means a lot to me.

Rob
  • johndeereelfman said thank you

#7 johndeereelfman OFFLINE  

johndeereelfman

    Elfin Majic

  • Senior Member
  • Contributor
  • Member No: 3761
  • 5,475 Thanks
  • 2,532 posts
  • Location: Lititz, PA

Posted January 01, 2016 - 10:27 AM

Rob, hopefully these pictures will show you a better idea as to how the brackets mount and attach to each other. 

 

DSCN5002.JPG DSCN5003.JPG

DSCN5004.JPG


  • Bolens 1000, Trav1s and oldiron1 have said thanks

#8 oldiron1 OFFLINE  

oldiron1
  • Senior Member
  • Member No: 43924
  • 292 Thanks
  • 182 posts
  • Location: Hartford, Wisconsin

Posted January 04, 2016 - 05:22 PM

Awesome! Thanks so much for taking the time to take and post these pictures; super helpful!

 

I have one more question now...how does the heat shield supposed to be installed above the muffler on the right side of the tractor? (It is odd shaped, has only 1 hole and can't quite figure out how it's supposed to be installed. 

 

Thanks again!! Rob



#9 Kster526 OFFLINE  

Kster526
  • Member
  • Member No: 77872
  • 0 Thanks
  • 1 posts
  • Location: Oley,Pa

Posted January 10, 2016 - 06:56 PM

The piece you are talking about goes on the right side as you said above the muffler. The shield is held on with the hood bolt wider part coming out the back above the muffler. The lock washer and nut go against the bracket

Attached Thumbnails

  • image.jpeg


#10 M.Cain OFFLINE  

M.Cain
  • Senior Member
  • Member No: 68107
  • 185 Thanks
  • 158 posts
  • Location: Alexandria Indiana

Posted January 15, 2016 - 12:49 PM

This might help also

65 110 005.jpg

65 110 006.jpg

65 110 007.jpg

1965-110 002.jpg

My 65 - 110 006.jpg

65-110 6-28-13 001.jpg



#11 M.Cain OFFLINE  

M.Cain
  • Senior Member
  • Member No: 68107
  • 185 Thanks
  • 158 posts
  • Location: Alexandria Indiana

Posted January 15, 2016 - 12:52 PM

1965 110 Done 008.JPG

 

 

Attached Thumbnails

  • My 65 - 110 010.JPG

Edited by M.Cain, January 15, 2016 - 12:55 PM.





Top