Attached to a Hobart G-213 welder. Engine seems to be in good shape. The batts were dead but it starts w/ one or two pulls on the hand crank and no blue smoke. Had to gravity feed it gas as the fuel pump isn't pumping. Ran it just long enough to make sure it welds and A/C is working. It's been sitting for awhile so I think tank a cleaning, fuel pump check and carb cleaning are in order. I'll also remove all tin to check for nests in welder and engine.
If the pump diaphragm is bad does anyone know if a kit is available or a decent price on a new one. I've checked on E-pay and found some for $38 to $45. Didn't check to see how much shipping is.
Edited by ol' stonebreaker, October 26, 2015 - 08:28 PM.