Grandson Project (4 wheeler)
Posted August 16, 2015 - 08:29 AM
Posted August 16, 2015 - 10:12 AM
The Key switch only has 2 wires, simple on/off function. looks like the PO had soldered the wires together. I can use a tractor switch for this. Now to figure out the push button start. It looks like 4 wires are used there.
Edited by larrybl, August 16, 2015 - 10:13 AM.
- MH81 said thank you
Posted August 17, 2015 - 10:01 PM
Well, I have some things sorted out and got it to turn over. Not really excited to tear much further into this. Grandson not real interested as it is not really "ours"
Check for safety switches if there is no spark if not that then the coil is real cheap. Get a pic of the carb
Posted August 17, 2015 - 10:04 PM
If it like mine the carb was so cheap I just replaced it $15 free shipping before I did I ran out of carb cleaner and cash so I boiled it in vinegar the only reason I replaced the carb was the bowl gasket was leaking
Edited by bbuckler, August 17, 2015 - 10:06 PM.
Posted August 18, 2015 - 09:33 PM
I'm giving up on this. Key switch works, Starter switch works, Fresh battery/ Lights work when key is on. Cranks strong. No fire from the magneto. Confirmed with a plug tester.
Possible Remote control module
Possible CGI module
Parts are cheep, but not Mine, He needs to take it to a shop.