OFFLINE
Posted July 31, 2015 - 05:22 PM
Hi Everyone, I am new to the site and I am in the middle of a 18 hp Kawasaki water cooled John deere engine. It had the plastic cam gear that i am replacing, does anyone here have the instructions on setting the timing on this engine?
Thanks for any help
iamdad.
OFFLINE
Tractorholic
Posted July 31, 2015 - 07:10 PM
ONLINE
I didn't do it! Unless you have paperwork to back it up
Posted July 31, 2015 - 07:44 PM
Edited by Marty'70, July 31, 2015 - 07:45 PM.
OFFLINE
Member
Posted July 31, 2015 - 07:52 PM
On the FD620D you need to line up the marks on both gears so they are closest together.
OFFLINE
Super Moderator
Posted July 31, 2015 - 07:59 PM
If you check the Kawi web site they might have that information on line. JD won't let us post manuals here.
OFFLINE
Freedom is not Free. Thank those in uniform for your freedom.
Posted July 31, 2015 - 09:20 PM
Welcome to GTtalk. I believe you have the FD590 engine. check your PM inbox.
OFFLINE
GT Lunatic
Posted August 01, 2015 - 10:47 AM
ONLINE
Tinker Master
Posted August 01, 2015 - 11:23 AM
Welcome aboard iamdad! 
The timing is all triggered by the flywheel magnets. As long as the flywheel key isn't bent or sheared life is good!
OFFLINE
Posted August 01, 2015 - 12:57 PM
Thanks for all the great information, I am in the process of putting the engine back together and will let everyone know how it runs.Thanks for the warm welcomes as well.
Iamdad :)
OFFLINE
Posted August 03, 2015 - 02:12 AM
What model is the tractor? 18hp liquid cooled sounds like the FD590V which would be a 285, 320 or 345.
