I bought this at a yard sale last summer for $35, posted it in the power equipment forum to find out what it was(see thread "snowblower brand), got it running and then parked it due to a bad bearing on the auger that I have not been able to make it to the local bearing place for yet. I just found some pics of it that I didn't know I had and thought I'd share them, enjoy.

Toro Power Handle and Snow Hound attachment.
#2
ONLINE
Posted July 22, 2015 - 07:31 PM
I think that I have an owners manual for that. I will try to scan it and post it. Good Luck, Rick
- Gtractor said thank you
#3
OFFLINE
Posted July 22, 2015 - 07:34 PM
That would be awesome.
#4
ONLINE
Posted July 22, 2015 - 10:15 PM
Toro sold many Power Handles and their attachments in the 1950's & 1960's. .....The early models had B&S engines, while the later models had Tecumseh engines.
Some of the attachments available were: self-propelled rotary mower, reel mower, tiller, snow blower, edger, water pump, sprayer, as well as some I can't remember.
- MH81 and boyscout862 have said thanks
#5
OFFLINE
Posted July 22, 2015 - 10:27 PM
Better hurry, winter is only a few months away
#6
OFFLINE
Posted July 22, 2015 - 10:49 PM
It's pretty much just a toy for the snow we get around here, we have a big walk behind blower , skid loader, and if all works out blades on my Case 210 and RAM.
#7
ONLINE
Posted July 23, 2015 - 04:06 PM
That would be awesome.
I found it and my son scanned it.
Good Luck, Rick
HDWILDBILL fixed it up and it is in the Manuals Section now under walkbehinds. http://gardentractor...o-power-handle/
Edited by boyscout862, July 23, 2015 - 08:44 PM.
- Bruce Dorsi said thank you
#8
OFFLINE
#9
ONLINE
Posted July 23, 2015 - 09:58 PM
On the wood pallet in the center of photo is that 3 Toro Power Handles I see ? Cheers Mike
IMG_20150529_151024.jpg
Yes !