MF16 Resto and 3pt hitch add on.
Posted March 10, 2011 - 11:15 PM
usable condition. The tractor was in good running shape, except for a couple
issues like rubber motor mounts, and some slop in the steering.
Feb 18th, I put it in the shop and tackled it.
Here's a few pics of the work in process, and the pics are of what I did
today. I'm waiting for the motor mounts, so I decided ths morning to
installing a 3pt that I had ear marked for this machine. Every thing
else I have pretty much done, ready for final assembley.
The 3pt is off a 1450. I didn't want to mangle the seat pan, so I made
up a stand off bracket. It took a bit of tweeking, but it's going to work.
I'm going to use a solenoid valve, and a toggle switch, and pipe the valve
into the return line from the deck lift valve. The valve will be under the seat.
Posted March 10, 2011 - 11:25 PM
Posted March 11, 2011 - 05:29 AM
Posted March 11, 2011 - 06:57 AM
Posted March 11, 2011 - 07:34 AM
Posted March 11, 2011 - 10:19 PM
Posted March 11, 2011 - 10:27 PM
Posted March 11, 2011 - 10:39 PM
Posted March 11, 2011 - 11:32 PM
Posted March 26, 2011 - 04:36 PM
Posted May 26, 2011 - 07:47 PM
show it off. Even my wife likes it.
It was dusk, so pics aren't to good.
I will redo on a sunny day.
- mikebramel and Texas Deere and Horse have said thanks
Posted May 26, 2011 - 11:13 PM
Posted May 27, 2011 - 01:56 AM
Beeeyooteefull paint job!!!
Love the covered bridge and mill pond!! That is something I've daydreamed about for decades.
Posted May 27, 2011 - 04:27 AM
Posted May 27, 2011 - 04:28 AM