Not my plow just a picture of one I found on the internet. This is the first one I have seen that actually has a lot of were on the point. I wonder if it works very well, because I know when a plow loses its point it doesn't go in the ground very well.
Worn sears plow
Posted January 12, 2015 - 07:55 PM
- NUTNDUN and Oldford have said thanks
Posted January 12, 2015 - 10:31 PM
Two ways to look at this plow. As someone who has blacksmith skills I could easily repoint it and hammer out this share. But with that being said it wont look the same if your wanting it to restore and collect for showing purposes. looks to be an 8" plow so I would get it.
- NUTNDUN and Bob IN have said thanks
Posted January 13, 2015 - 06:00 AM
- NUTNDUN, Lauber1 and Bob IN have said thanks
Posted January 13, 2015 - 07:02 AM
Somebody had a lot of seat time with that plow. Lucky them. Noel
I gotta agree that someone had a lot of seat time and they are lucky. Maybe someday I can get enough seat time to wear one down that far.
- Lauber1, Bob IN and propane1 have said thanks
Posted January 13, 2015 - 06:27 PM
not always a lot of seat time, it depends on what you have to plow. Here in my area we have black sand. A normal yr will wear out 2 sets of sweeps on the field cultivator. Down south of me at Dad's place the clay don't tear up the tooling nearly as much. Also some times people will damage stuff by not having it set right, like the nose of the plow running to much down hill and most of the work I being done by the point instead of along the shear.
- Bob IN, propane1 and ghostriderexpress have said thanks