Jump to content

Nominations for Tractor of the Month
Garden Tractors and Parts on eBay



Photo
- - - - -

Would Like to Have Manuals for Impliments I Have


  • Please log in to reply
11 replies to this topic

#1 chieffan OFFLINE  

chieffan
  • Senior Member
  • Contributor
  • Member No: 62695
  • 6,157 Thanks
  • 4,503 posts
  • Location: SW Iowa

Posted December 24, 2014 - 01:58 PM

I have two implements that I cannot find manuals for.  The first is a Mower deck, 42 inch, model number is 18422-01.  The manuals sections list a 18421 then jumps to a 18423.  Would one of these be the same and if so, which one?

 

My second item is a Snow Thrower.  The model is 18514-04.  I can only find manuals for the newer style with the drive shaft to the rightMine has the open drive shaft to the left of the thrower.  Any help on either or both would be greatly appreciated.

 

The thrower is operational, I hope.  Have not done anything with the deck yet but want to put it in service next spring.

 

 



#2 chieffan OFFLINE  

chieffan
  • Senior Member
  • Contributor
  • Member No: 62695
  • 6,157 Thanks
  • 4,503 posts
  • Location: SW Iowa

Posted December 24, 2014 - 09:16 PM

OK, I found the parts list on another site for the snow caster:

 

http://www.samsbolen...arts_list_1.jpg

 

1.jpg is the diagram and 2.jpg is the part number listing.  If some one is a lot more computer savoy than I am maybe they can get them uploaded to this site.

 

Now to hunt for the mower manual.  Samsbolens skips the 18422 model number also.


Edited by chieffan, December 24, 2014 - 09:17 PM.

  • NUTNDUN said thank you

#3 NUTNDUN OFFLINE  

NUTNDUN

    Lost in Cyber Space

  • Admin
  • Staff
  • -GTt Supporter-
  • Contributor
  • Member No: 3
  • 10,266 Thanks
  • 15,618 posts
  • Location: Pennsylvania

Posted December 24, 2014 - 09:20 PM

We can definitely get something added here. I am not sure on the mower deck. I know the guys that know more on the Bolens stuff will chime in, been a little quiet with the holidays.


  • chieffan said thank you

#4 chieffan OFFLINE  

chieffan
  • Senior Member
  • Contributor
  • Member No: 62695
  • 6,157 Thanks
  • 4,503 posts
  • Location: SW Iowa

Posted December 24, 2014 - 09:39 PM

Yes, it has been a little quiet but it sure makes the net run faster.  That is why I am doing my looking now.  About time to find some covers though.



#5 Bolens 1000 OFFLINE  

Bolens 1000

    DR. Bolens

  • Staff Admin
  • Staff
  • -GTt Supporter-
  • Contributor
  • Member No: 7
  • 12,696 Thanks
  • 17,206 posts
  • Location: Western NY

Posted December 24, 2014 - 09:50 PM

I should have manuals for every mower and blower.... only problem is finding them :wallbanging:


  • chieffan said thank you

#6 chieffan OFFLINE  

chieffan
  • Senior Member
  • Contributor
  • Member No: 62695
  • 6,157 Thanks
  • 4,503 posts
  • Location: SW Iowa

Posted December 25, 2014 - 07:59 AM

No big hurry for them.  Just thought I would hunt them up now that things are a little slow around here.  Especially quiet on the net so it runs a lot faster, even with a dish hook up.



#7 chieffan OFFLINE  

chieffan
  • Senior Member
  • Contributor
  • Member No: 62695
  • 6,157 Thanks
  • 4,503 posts
  • Location: SW Iowa

Posted December 25, 2014 - 10:00 AM

I should have manuals for every mower and blower.... only problem is finding them :wallbanging:

Sounds like my filing system.  Where ever I put it is where it is filed !



#8 GTTinkerer OFFLINE  

GTTinkerer

    GT Tinkerer

  • Senior Member
  • -GTt Supporter-
  • Contributor
  • Member No: 1564
  • 1,153 Thanks
  • 1,326 posts
  • Location: Mancelona, MI

Posted December 25, 2014 - 11:23 AM

Sounds like my filing system.  Where ever I put it is where it is filed !

 

Sounds like my wife when I ask her where she put something I am looking for and she says she put it "up" but I still haven't found out where up is.


  • Little Irish Men said thank you

#9 Bolens 1000 OFFLINE  

Bolens 1000

    DR. Bolens

  • Staff Admin
  • Staff
  • -GTt Supporter-
  • Contributor
  • Member No: 7
  • 12,696 Thanks
  • 17,206 posts
  • Location: Western NY

Posted December 25, 2014 - 05:30 PM

Here you go not the best quality but readable :D

18422-01

 

http://gardentractor...wer-parts-list/

 

Had to take pics with a camera as it is in a big dealer binder and cant be scanned.


  • chieffan said thank you

#10 chieffan OFFLINE  

chieffan
  • Senior Member
  • Contributor
  • Member No: 62695
  • 6,157 Thanks
  • 4,503 posts
  • Location: SW Iowa

Posted December 26, 2014 - 09:02 AM

Got them printed off.  Very readable and a lot more than what I had to start with.  Appreciate the work on this.  My work in the shop today and put the slot in the lift bar for the front blade.  Several years ago I "acquired" a bunch of cross arms with their braces from the RR when they were clearing them out.  Those 3/16" X 1 1/8" x 30" flat sure came in handy a lot of times.  Heavy galvanized so that has to be burned off when welding, but they still work and the price is right.  Will get it bent and the slot cut and it is ready to go.



#11 Bruce Dorsi ONLINE  

Bruce Dorsi

    Old, but not dead -- yet!

  • Senior Member
  • -GTt Supporter-
  • Contributor
  • Member No: 1525
  • 3,176 Thanks
  • 2,147 posts
  • Location: New Jersey

Posted December 26, 2014 - 09:40 AM

The info for the 18514 and 18516 Snow-Casters has been here at GTT since 2010.

 

It's been hiding in the wrong location. :D

 

http://gardentractor...ruction-manual/


  • Bolens 1000 and chieffan have said thanks

#12 chieffan OFFLINE  

chieffan
  • Senior Member
  • Contributor
  • Member No: 62695
  • 6,157 Thanks
  • 4,503 posts
  • Location: SW Iowa

Posted December 26, 2014 - 11:50 AM

Guess I didn't dig deep enough or wide enough did I?  Looks like cosmetic difference between the -01&-02 series to my -04 series.  Part numbers seem to be the same except for the rounded chute, etc.  Thanks for finding that for me.  I now have all the manuals for my Bolens equipment.  Even for the 13 hp re-power I did.






Top