7 replies to this topic

[Petenpole]

This may seem stupid but I will ask anyway

 

Is the transmission in a MF10 the same transmission used in the MF1200?

 

The 1200 has a 4 speed peerless and the MF 10 also has a 4 speed.  I am just curious if they are interchangeable.

 

thank you

[LYON222]

I don't believe the 1200 has the variable drive system like the 10 does. So my guess would be no

[ckjakline]

I don't believe the 1200 has the variable drive system like the 10 does. So my guess would be no

The variable speed setup is a totally different pulley set up under the dash.

[LYON222]

The variable speed setup is a totally different pulley set up under the dash.

So would they be the same? If be interested. We actually have a 1200 that needs a tranossion

[ckjakline]

So would they be the same? If be interested. We actually have a 1200 that needs a tranossion

I just looked it up and the casings are the same so it'll bolt up.The actual transmission part# is different.I'm not sure why though.I didn't dig that deep.Maybe gearing or the different shifter?

[LYON222]

I just looked it up and the casings are the same so it'll bolt up.The actual transmission part# is different.I'm not sure why though.I didn't dig that deep.Maybe gearing or the different shifter?

Hmmmm I'll have to take a look and see if there's any visual differences.

[HowardsMF155]

The things that seem to change on the Peerless 23XX series of Transmissions are the shifter and the axle ends, (small spline, keyway,tapered, etc.) 

[Petenpole]

My MF 10 has a bad 2nd gear and was hoping with maybe a shifter change out I could swap out the 10 transmission  with a 1200/1600 transmission. 

Edited by Petenpole, August 14, 2014 - 09:43 AM.