John Deere 140 H1 & John Deere 140 H3 Body Pan
Posted May 07, 2014 - 09:13 PM
They look like the same style and shape.
Posted May 07, 2014 - 09:15 PM
Welcome to GTtalk. Yes the fender pans are the same. Post some photos of your 140 if you can.
Posted May 07, 2014 - 09:47 PM
The only thing to watch out for is this: Some of the late 140H1 machines shared fender pans with the 120s. Those pans did not have a cut-out on the back. You can see it what I am talking about on my 120:
Edited by Trav1s, May 07, 2014 - 09:51 PM.
- Alc and Texas Deere and Horse have said thanks
Posted May 08, 2014 - 02:44 AM
Hello Dave and welcome to GTT.
I think, you are looking for the fender deck. In JDPC you'll find this three decks
Posted May 08, 2014 - 02:47 AM
Posted May 08, 2014 - 05:39 AM
The seat adjustment is different as well. The early models (1968-1970) have a wire pull to adjust the seat front and back, as the later models (1971-1974) have a side lever adjustment. I think the very early models have the hydro release located under the seat, whereas the later models have the release located in front of the seat.
- Texas Deere and Horse and Trav1s have said thanks
Posted May 08, 2014 - 05:43 AM
A switch was made to a different Hydro / rearend at the 30000 ser. no. point. If you don't want to use a 3 point hitch then the lack of a notch in the back won't be an issue. I'm wondering if the early 300 series fender deck would fit a 140? Anyone know the answer.
- Texas Deere and Horse said thank you
Posted May 08, 2014 - 08:44 AM
Welcome to GTT. Relax and enjoy the site. Good Luck, Rick
Posted May 10, 2014 - 07:47 AM
Thanks again to all who responded to my post, Dave.
Posted May 10, 2014 - 11:18 AM
Another thing to consider - you could swap over the H-3 parts to the H-1. The catch is that there are difference between the early transaxle and late style transaxle. The break is 30,001 and up for the late style transaxle.
Posted May 10, 2014 - 01:20 PM
- Trav1s said thank you
Posted May 10, 2014 - 01:28 PM
I'm wondering if the early 300 series fender deck would fit a 140? Anyone know the answer.
JD, The early 300 series are different because JD moved the gas tank under the seat.
From a JD300,
- JDBrian said thank you
Posted May 10, 2014 - 02:25 PM
Trav1s, that is something to consider. Now you have given me something to think about, Dave.
Posted February 27, 2015 - 03:26 PM
Actually, I am wondering this too. There are several pictures of 140s with under tank seats. I am curious about how this is done. I have a seat pan in pretty bad shape and was wondering if this would be an option that I could look into along with a repower I am planning on doing on the same tractor.