K341Aqs Standard Piston And Rings, Help
Posted April 16, 2014 - 05:54 PM
Posted April 16, 2014 - 06:14 PM
Maybe, check with some of the site sponsors.
- propane1 said thank you
Posted April 16, 2014 - 06:45 PM
Having a hard time finding a standard piston and rings! Any ideas. E bay kits seem to be out of stock. Kohler parts here are very expensive. 372.00 just for piston and rings, plus rod and gaskets. Over seized pistons seem to be available, but don't what to bore engine just to make it fit. Any ideas would be appreciated. Noel
If you want send me a pm with the model and spec number and I can give you a price. I belive I have those sitting on the shelf but will have to look. Also if you prefer OEM or Aftermarket.
- IamSherwood, boyscout862 and propane1 have said thanks
Posted April 16, 2014 - 07:49 PM
Posted April 16, 2014 - 08:45 PM
Noel, assuming it is not an unusual spec, the part number should be a 47 874 01. I can sell you a piston and rings set for $80.
I can sell a complete rebuild kit (standard bore and standard rod) for $165. New piston, new rings, new rod, and a new gasket set. All of these are aftermarket parts, but very high quality parts.
- boyscout862 and propane1 have said thanks
Posted April 18, 2014 - 05:16 AM