Jump to content

Garden Tractors and Parts on eBay



Photo
- - - - -

Disking With The Garden Tractor


  • Please log in to reply
16 replies to this topic

#1 propane1 OFFLINE  

propane1
  • Senior Member
  • Member No: 54307
  • 8,114 Thanks
  • 3,922 posts
  • Location: Charlottetown, Prince Edward Island, Canada

Posted April 11, 2014 - 04:26 PM

I used this disk at the Dundas Plowing Match last year here in PEI. Had a lot of fun. The area I disked was the practice area for the antique farm tractors before the real plowing took place. Disks did a nice job. Noel 

 

I had the disks on the LGT 100 open side tractor with weight on the disks. 

Attached Thumbnails

  • Picture 039.jpg
  • Picture 048.jpg
  • Picture 196.jpg

  • DH1, daytime dave, MH81 and 13 others have said thanks

#2 DH1 ONLINE  

DH1

    Electric Tractors

  • Senior Member
  • -GTt Supporter-
  • Contributor
  • Member No: 62
  • 5,100 Thanks
  • 5,501 posts

Posted April 11, 2014 - 04:28 PM

Putting them to work and getting it done.

 

Good Stuff


  • tinbender7 and propane1 have said thanks

#3 Chopperhed OFFLINE  

Chopperhed
  • Senior Member
  • Member No: 20120
  • 1,852 Thanks
  • 1,071 posts
  • Location: Edmonton, Ab, Canada

Posted April 11, 2014 - 04:55 PM

Nice Stuff, Some good seat time there.


  • tinbender7 and propane1 have said thanks

#4 glgrumpy OFFLINE  

glgrumpy

    Getting Out!

  • Senior Member
  • -GTt Supporter-
  • Member No: 8360
  • 8,450 Thanks
  • 7,813 posts
  • Location: Huntington, IN 46750 North East in State

Posted April 11, 2014 - 06:15 PM

Disc, then plow???  Ummm! Isn't that backwards?  Doesn't that make the plowing able to be done even with "Wimpy" sizes then? 

Just kidding here, have no idea of plowing and haven't done it. Just wanted to be included in conversation cause I'm bored! :smilewink:


  • MH81, tinbender7 and propane1 have said thanks

#5 Rock farmer ONLINE  

Rock farmer
  • Senior Member
  • -GTt Supporter-
  • Member No: 10759
  • 1,194 Thanks
  • 1,229 posts
  • Location: York Maine

Posted April 11, 2014 - 08:16 PM

Is that a factory sleeve hitch for each tractor?
Those are pretty rare!
Can you lift that disc with the tractor? Or is it just a drag harrow?

Joe
  • propane1 said thank you

#6 propane1 OFFLINE  

propane1
  • Senior Member
  • Member No: 54307
  • 8,114 Thanks
  • 3,922 posts
  • Location: Charlottetown, Prince Edward Island, Canada

Posted April 11, 2014 - 08:57 PM

No problem to lift with the hydraulics and with the manual lift on the LGT 100 with manual lift, just extra arm power. Noel.
  • Alc and Rock farmer have said thanks

#7 propane1 OFFLINE  

propane1
  • Senior Member
  • Member No: 54307
  • 8,114 Thanks
  • 3,922 posts
  • Location: Charlottetown, Prince Edward Island, Canada

Posted April 11, 2014 - 08:58 PM

Sorry, every thing is factory on the lifts. Noel
  • Rock farmer said thank you

#8 HowardsMF155 ONLINE  

HowardsMF155

    Tractorholic

  • Senior Member
  • Member No: 4243
  • 2,827 Thanks
  • 2,970 posts
  • Location: Central NC

Posted April 11, 2014 - 08:59 PM

That disk was doing a nice job there.  Good looking setup!


  • propane1 said thank you

#9 propane1 OFFLINE  

propane1
  • Senior Member
  • Member No: 54307
  • 8,114 Thanks
  • 3,922 posts
  • Location: Charlottetown, Prince Edward Island, Canada

Posted April 11, 2014 - 09:03 PM

Disc, then plow??? Ummm! Isn't that backwards? Doesn't that make the plowing able to be done even with "Wimpy" sizes then?
Just kidding here, have no idea of plowing and haven't done it. Just wanted to be included in conversation cause I'm bored! :smilewink:


You should try it !! It's fun and makes the tractor work. Noel

#10 The Fife Plooman ONLINE  

The Fife Plooman
  • Senior Member
  • Member No: 54903
  • 1,558 Thanks
  • 293 posts
  • Location: Longforgan Dundee

Posted April 12, 2014 - 01:29 AM

I like it. I am sure your tractor and disks would like a holiday in Scotland :wave:

George S


  • propane1 said thank you

#11 jd.rasentrac OFFLINE  

jd.rasentrac

    Admirer of DEERE enjoyneering and design!

  • Senior Member
  • Contributor
  • Member No: 10327
  • 4,678 Thanks
  • 4,206 posts
  • Location: Niedervorschütz, Hessen, Deutschland

Posted April 12, 2014 - 03:18 AM

thanx for the pix, Noel. well done.


  • propane1 said thank you

#12 OldBuzzard ONLINE  

OldBuzzard

    Tractorholic

  • Senior Member
  • Contributor
  • Member No: 805
  • 6,882 Thanks
  • 4,755 posts
  • Location: Oberlin, OH

Posted April 12, 2014 - 08:32 AM

... Can you lift that disc with the tractor? Or is it just a drag harrow?

Joe

 

The sleeve hitch disks were not designed to be lifted.  I guess maybe some people have done it, but it's not recommended.


  • Rock farmer said thank you

#13 motobreeder OFFLINE  

motobreeder

    Member

  • Senior Member
  • Contributor
  • Member No: 3989
  • 433 Thanks
  • 618 posts
  • Location: Eastern Ontario

Posted April 13, 2014 - 11:21 PM

Curious - if the disks aren't lifted by the sleeve hitch, how are they transported?



#14 MH81 OFFLINE  

MH81

    Proud to be Deplorable

  • Senior Member
  • -GTt Supporter-
  • Contributor
  • Member No: 802
  • 29,960 Thanks
  • 29,757 posts
  • Location: N. W. PA

Posted April 13, 2014 - 11:25 PM

Curious - if the disks aren't lifted by the sleeve hitch, how are they transported?


Awkwardly, with mild lawn damage
  • motobreeder and twostep have said thanks

#15 propane1 OFFLINE  

propane1
  • Senior Member
  • Member No: 54307
  • 8,114 Thanks
  • 3,922 posts
  • Location: Charlottetown, Prince Edward Island, Canada

Posted April 14, 2014 - 05:06 AM

They are lifted by the sleeve hitch. Noel




Top