OFFLINE
Summer.
Posted January 11, 2014 - 09:09 AM
Sorting out all the photos and found this.
The Yanmar L40 engine is now on my Ariens mower but first it was mounted to the Ariens front tine tiller for break-in from new. Sat under a work bench for years before the owner got tired of looking at it.
The Arines was painted green and red, this is after testing, a dirt shield was fab'ed up after these photos.
Edited by trowel, January 11, 2014 - 09:10 AM.
ONLINE
FORDoholic
Posted January 11, 2014 - 09:42 AM
Bet that chewed up the garden!
OFFLINE
Summer.
Posted January 11, 2014 - 09:49 AM
Thanks, did not speed up the tines any faster then the original ground speed, 3 inch pulley but had more grunt at half throttle then the original Briggs did. Did a lot of gardens that spring, Peter thought the rod was knocking 
diesel knock, nothing like it.
ONLINE
FORDoholic
Posted January 11, 2014 - 10:04 AM
Yeah. That would keep on chewing when the Briggs stalled out!
OFFLINE
Summer.
Posted January 11, 2014 - 10:12 AM
These are old photos buried deep, the Ariens has since been replaced by the gear tranny Sears and the engine on the Ariens mower.
