Wheel horse snow plow
Posted December 23, 2010 - 04:44 PM
Posted December 23, 2010 - 09:21 PM
- Rocking416 said thank you
Posted December 23, 2010 - 10:49 PM
About 2 months ago I bought a second snow plow from a guy and brought it home, stuck it in the barn, moved it 3 or 4 times, but apparently never looked at it very closely. As it turns out, it has that lift link on it. I took some pics and some measurements.
The link measures 5 5/16" overall by 1/4" thick by 1 1/4" wide. The holes are 4" center to center and measure just over 3/8" Dia. (probably 13/32", hard to tell without my calipers, but probably not that critical)
The pin is 3/8" in Dia. by 7/8" usable pin length, or 1" overall.
I also found this pic online that shows a homemade lift link installed.
I hope that this is what you were looking for and sorry for being temporarily daft!
- MH81 and Rocking416 have said thanks
Posted December 24, 2010 - 02:29 AM
Recurring, but temporary.
It is one of the reasons we get along so well.
Posted December 24, 2010 - 09:52 AM
Posted December 24, 2010 - 12:33 PM
Posted December 24, 2010 - 12:37 PM
You're more than welcome! I'm happy to help when I'm able
Now THAT'S what I like about this forum! Lot's of good people willing to help!
Posted December 24, 2010 - 12:52 PM
Posted December 24, 2010 - 02:00 PM