Just bought a massey ferguson 10 and a 630 dozer blade over the weekend. Problem is that I am missing the stabilizer support and Helper spring that hook on the tractor. Does anyone have any pics of theirs that they could post for me with dimensions so that I can have one made? previous owner says that he has the rear yoke but I will ask him if he has the bracket and spring. anyway, Pics and dimensions would be very helpful. Thanks
Massey Ferguson 630 Dozer Blade Part Pics Needed
Posted April 11, 2013 - 05:36 PM
Posted April 11, 2013 - 05:58 PM
They used 2 different brackets
You don't really need the spring and you can make one out of a piece of angle iron, all it does is stop the blade from moving side to side. Like this.
- MH81 and pwombles have said thanks
Posted April 11, 2013 - 08:38 PM
I was figuring that the helper spring helped when lifting the blade with the implement lift. If i really dont need it, thats great! My welding skills are extremely limited so the angle iron bracket would be great! looks like I could make it from a piece of 4x4 angle? Simple enough!