I made a mf10/12 sleeve hitch for a fellow gttalk member and thought these pics would be helpful for him to get it mounted. I also thought they could be helpful to anyone wanting to build a hitch, it's easier for me to build something when I can visualize how it works. For these pics I mounted his hitch on an old stripped down mf10 frame. It would mount the same on a mf12g and also 12h (hydrastatic), although the 12h has a longer lift rod with a bend in it to clear the rear end. The red/rusty parts in the pics are original massey parts, everything else are copies I made using original parts as a pattern and mount exactly as the originals. Originally I believe they used hair pin style clips but I switched to cotter pins for the hitch mounting pins. I've had the hair pins fall out while plowing, luckily the connecting pin didn't fall out. It could cause major damage if a connecting pin fell out of one side while plowing.