Got the EK off of the trailer, and got the truck 'unstuck'
The trailer tongue was so low that the jack wasn't going to be able to deploy. I have an A frame on the HDT1000 that has a sleeve hitch on one side and a tow tab on the other. I put a 2" ball into the tab. Backed the HDT up the the right side of the trailer up near the front. Uncoupled the hitch, and raised the trailer up with the 3-pt until it was off the truck, and high enough to swing down the jack. I did put some extra planks under the jack to keep it from sinking. Dropped it back down with the 3-pt and we were 1/2 way done .
I then got a tow strap hooked to the truck, and with the neighbor driving it, 'helped' it out with the HDT.
I was thinking of moving that trailer while I was at it, but decided that there are enough ruts in that area already.
I think I'll wait for the ground to freeze for awhile before I do that.