Post pictures of Your shop/barn
Posted August 17, 2010 - 09:52 AM
Here are my barn and shop.
This is my 18'x26' barn that has a 12'x 26' lean to
this in my 24' X 20' shop.
Here is the inside of the shop.
This is the inside of the barn
The lean to is fire wood storage.
Posted August 17, 2010 - 10:10 AM
Posted August 17, 2010 - 10:48 AM
Posted August 17, 2010 - 10:54 AM
I like it Chuck, I like having the shop and barn separate for storage.
I TRY to keep the shop emptier so I have room to bring things in and work on them, but lately it has been catching a lot of extra stuff. ( I am remodeling a room in the house)
Posted August 17, 2010 - 11:23 AM
Posted August 17, 2010 - 11:29 AM
Posted August 17, 2010 - 11:52 AM
Posted August 17, 2010 - 01:34 PM
Hey Jack,nice assortment , I see you even have a Patio JD.
SIGH !!!!! Yes he does, sad to say.
He never asked my permission either. Just went ahead like the impetuous fool he can be at times and scooped it up. :mad2:
Posted August 17, 2010 - 08:06 PM
This is my "personal shop. I CANNOT store/park/work on my GT's in any of the farm buildings, as Dad doesn't care if he runs over other's stuff at all. Small, the working area is only 22x13', but the small add-on room on the right holds inventory & "stuff" to give me a bit more room.
I later added this shed on the side of my little shop to store my tractors in. It won't hold them all, but the rest fit in the open sided shed I park my Cherokee & F250 in.
Posted August 17, 2010 - 08:23 PM
The only pic I can find now is a shot of the mess I had about half way thru the 'remodel'.
What was happening here:
I built the bench on the left side of the pic; I was putting up peg board and plywood all the way around. I built a bench straight back from the pic, under the saw. I replaced the lights shown with 4 bulb suspended ceiling lights, stuck up between the loft joists. It's done for now, but I've got the next round of improvements thought out... just waiting on some cooler weather.
Posted October 10, 2011 - 03:36 PM
Posted October 10, 2011 - 04:52 PM
I added a lean-to the full length on the one side.
The front half of the lean-to is for parking the truck and I park the mower in the side garage door.
The front of the garage is for Marie to park her car and I use the side space for storage.
The back of the garage is my workshop.
When I added on the side, I opened it up to include that space also.
There are two sliding doors that close off the back of the garage from front so I can heat the work shop.
We also have a small barn for extra storage.
Posted October 10, 2011 - 05:18 PM
Posted October 11, 2011 - 08:12 PM
Posted October 11, 2011 - 09:02 PM
Two oversize (height and width) on the front with two oversize bays. Work space, tool storage and machine shop fit round the back and side. The attached building is my paint booth, with flammable storage on the back (with a blow out wall - "just in case") .
Also have a couple 3 sided out building to park equipment (tractors, golf cart, etc) in.
I need to add on to the shop - running out of work room for multiple projects. I am working on plans to add a section on the back (will cut a door in the wall to get into it). That will house the new wood shop, metal shop, part storage, and a work area. Looking at 20x30 for the addition. But gotta save up some money before I can swing it.
Anyway, here are a couple pictures of the existing shop.