9 replies to this topic

[baerpath]

Trying to find a set of rods for my Lombaridini diesel engine. Anyone have any idea where to get them ? Figure better chance here than in the classifieds
I'd hate to have to go back to a gas powered mower
Duane

[Cat385B]

http://www.lombardin.../left-hand-menu

Look through there and see if you can find a part #. There is a possible source in Georgia I'm checking into now.

[achomesteader]

you could contact these folks to see if this is the correct part:

http://www.m-and-d.c...15260300-S.html

[Cvans]

Do what ever it takes to keep it diesel. I've heard that going back to gas is next to treason.

[goodnews]

Trying to find a set of rods for my Lombaridini diesel engine. Anyone have any idea where to get them ? Figure better chance here than in the classifieds
I'd hate to have to go back to a gas powered mower
Duane

yes keep it diesel you'll be glad you did in the long run. in Christ bobby

[baerpath]

http://www.lombardin.../left-hand-menu

Look through there and see if you can find a part #. There is a possible source in Georgia I'm checking into now.

Any luck there Cat ? We found one and are having it sent from a North Dakota Kohler dealer
Part # ED 00152 60 300-S If anyone has one laying around
Duane

[Cat385B]

Duane, the outfit in Georgia said they quit supplying when Kohler bought em out. (Lombardini) Don't know why they would be listed on the internet, though. That acquisition happened a long time ago.

They were very (extremely) unhelpful or cooperative on the phone.

Edited by Cat385B, November 15, 2012 - 06:47 PM.

[baerpath]

The story I got from the UK was that when Kohler bought the company they wouldn't take a lot of the lombra dealers on that weren't Kohler dealers, Parts now are Kohler dealer supplied only in th US. The dealer in the UK can't even sell to the US. But if someone over there bought them and shipped them to me that was fine

[mowinman2]

I had a 7790, and only needed a some fuel lines, and those copper washers for those pesky leaking injectors. I found a very helpful Lombardini dealer in Charlotte NC. They got my parts no problem. I also checked on Ebay all the time for parts, and there seemed to be a guy who had an engine torn down for parts on there a lot. Check on there too!

Here is the link to the dealer in Charlotte. Hope this helps some: http://www.kraftpower.com/
Thats actually the dealers main site, but they have loactions all over.

[baerpath]

Well now I have two 7790's Picked up another complete one gonna see if I can get it running Was ran out of fuel and sat for 2yrs outside.