Jump to content

Nominations for Tractor of the Month
Garden Tractors and Parts on eBay



Photo
- - - - -

MF16 Transmission Oil Filter Question


  • Please log in to reply
4 replies to this topic

#1 jayjay OFFLINE  

jayjay

    Member

  • Member
  • Member No: 635
  • 15 Thanks
  • 40 posts
  • Location: Raleigh, North Carolina

Posted August 10, 2010 - 09:16 PM

Hydraulic fluid is leaking from my transmission filter. There is a Fram automobile filter in place there. Is there a differance between regular auto filters and a hydraulic filter? My tractor calls for a #1043369m1 filter which is not installed.:confuse:

#2 ducky OFFLINE  

ducky

    Senior Member

  • Senior Member
  • -GTt Supporter-
  • Contributor
  • Member No: 564
  • 1,631 Thanks
  • 3,870 posts
  • Location: Freedom, WI

Posted August 10, 2010 - 09:43 PM

Yes definitely. there are Micro rating that are finer than what you would fine in Auto filters.

I am a Fleetguard nut and expect the 16 would need the same micro rating as the 16 and 1855 series.
these filter are rated at 10 micron.
Let me see if I can cross that MF # to Fleetguard.
This should be your filter. Same one I use on the 16 and 1855. Also fits the Snapper with the Eaton hydro. A little bit longer but not a problem.
http://www.cumminsfi...0&currentPage=1

#3 jayjay OFFLINE  

jayjay

    Member

  • Member
  • Member No: 635
  • 15 Thanks
  • 40 posts
  • Location: Raleigh, North Carolina

Posted August 11, 2010 - 07:56 AM

Thanks for the info .. I'll check out the link.

#4 MH81 ONLINE  

MH81

    Proud to be Deplorable

  • Staff Admin
  • Staff
  • -GTt Supporter-
  • Contributor
  • Member No: 802
  • 27,316 Thanks
  • 28,634 posts
  • Location: N. W. PA

Posted August 12, 2010 - 06:28 AM

Hey Ducky, any experience with the spin-on filters from hydro-gear? I called around & the 2 people that knew what I was talking about wanted $30 & $35 respectively for the filter. I found (and ordered) one on e-bay for $16.35 after shipping, but will need another one "200 use-hours" from now. original pt# 142912 Hydro-gear replacement # 51563 I tried the Cummings link & the 2nd # crosses - wrong filter.

#5 ducky OFFLINE  

ducky

    Senior Member

  • Senior Member
  • -GTt Supporter-
  • Contributor
  • Member No: 564
  • 1,631 Thanks
  • 3,870 posts
  • Location: Freedom, WI

Posted August 12, 2010 - 07:45 AM

Part NumberMfrFleetguard Part NumberDescriptionParts Required 1043369M1 MASSEY-FERGUSON HF6096 Hydraulic, Spin-On



Part Information Region: United States [change]



Posted Image HF6096

Hydraulic, Spin-On Back
Physical Dimensions Largest OD 93.98 mm (3.7 in) Overall Height 97.79 mm (3.85 in) Thread Size 3/4-16 UNF-2B Primary Applications CASE 395789R2 All Applications Replaces LF3309 -

This is the filter I use and it is a direct cross of the # you gave us.
Not sure on the price but I think it was $15 or $20 coconuts.




Top