
Darn Wheel Fell Off (1650 Content)
#1
OFFLINE
Posted August 13, 2012 - 08:17 AM
#2
ONLINE
Posted August 13, 2012 - 08:44 AM
ID 3/4", OD 1-3/8", Height 1-1/8"o
The replacements do not seem to last well but if your axle is smooth you may want to try this one. It has a lot more surface.
http://www.mfgsupply.com/9-7869.html- Buzzard217 said thank you
#3
OFFLINE
Posted August 13, 2012 - 09:08 AM
Edited by Buzzard217, August 13, 2012 - 09:08 AM.
#4
OFFLINE
Posted August 13, 2012 - 09:36 AM
#5
ONLINE
Posted August 13, 2012 - 09:47 AM
Sorry yes the OEM is not as thick If I remember right it is about 1/2 to 5/8 High.The bearing size you describe and the bearing size in the link are the same. Was one supposed to be larger than the other?
- Buzzard217 said thank you
#6
OFFLINE
Posted August 13, 2012 - 09:50 AM
This is the size you will be looking for
ID 3/4", OD 1-3/8", Height 1-1/8"o
The replacements do not seem to last well but if your axle is smooth you may want to try this one. It has a lot more surface.
http://www.mfgsupply.com/9-7869.html
Ditto.
That's the best deal I've found so far too.
#7
OFFLINE
Posted August 13, 2012 - 10:16 AM
It did. I didnt notice it actually, my buddy stopped me when he saw it. I was off camber and caught up in some roots so my head was turned around keeping an eye on the plow.Do it fall off while you were using it??? If so, that had to be quite the scare!
Sorry yes the OEM is not as thick If I remember right it is about 1/2 to 5/8 High.
Thank you sir! I'll be placing an order for 4.