will an mf620 snowblower fit a mf14
Posted July 12, 2010 - 11:41 PM
thanks and please excuse the dumbass questions I have asked so far , there will be plenty more Im sure --but will try and keep it to a minimum
Posted July 13, 2010 - 06:56 AM
Posted July 13, 2010 - 07:18 AM
Posted July 13, 2010 - 07:24 AM
Posted July 13, 2010 - 01:47 PM
youd need a 90d gearbox to get it to work
Posted July 13, 2010 - 10:35 PM
Posted May 07, 2018 - 02:50 PM
I own a MF 10 with the side pulley system. I am wondering how the belt configuration of the underbody carriage-belt 620 snowblower hooks to my power-system.
Is my side attachment pulley underneath the frame referred to a a PTO ?
Since the crankshaft is counter clockwise rotational......it seems that it will spin the auger in reverse
Am I missing something....a part....an option....a part of my brain ????
- limebuzz said thank you
Posted May 07, 2018 - 09:39 PM
Most of teh 10's and 12' I have seen have a PTO belt that runs off the engine down to a pulley. That pulley has a jackshaft and another pulley towards the center of the tractor. The PTO is turned off and on by the right hand foot petal, there is a idler pulley that tightens up the belt. The pulley off the jackshaft in the center of the tractor hooks to the belt on the snow blower. In this picture the pulley would hook where there is a loop in the belt.
- email@example.com said thank you
Posted May 07, 2018 - 10:21 PM
esbent...............thank you kindly and especially for the pic. A buddy stopped by this PM and we figured it out. I'll keep the pic if you don't mind for it'll help when I forget....tomorrow ;)
Posted May 08, 2018 - 12:45 PM