Jump to content

Garden Tractors and Parts on eBay



Photo
- - - - -

mf 12h lift hitch


  • Please log in to reply
6 replies to this topic

#1 bskip1 OFFLINE  

bskip1

    New Member

  • New Member
  • Member No: 593
  • 0 Thanks
  • 7 posts

Posted June 09, 2010 - 05:04 PM

Hey guys I'm new to this site and I have found out some great information on the MF 12H that I received from my grandpa. The other day I found a MF650 tiller and snow thrower on craigslist. I went and looked at them and I just had to bring them home. The guy I bought them from couldn't remember how to attach them so I found this site. I found the manuals for the attachments and I'm pretty sure I know how they go on now. But with the tiller it uses a lift hitch in which I do not have..which is why I'm here. I was wondering if any of you had photos and dimensions for the parts for this lift. I am interested in fabricating one up. Any help you could provide would be great.

Thanks, Brett

#2 DH1 ONLINE  

DH1

    Electric Tractors

  • Senior Member
  • -GTt Supporter-
  • Contributor
  • Member No: 62
  • 5,100 Thanks
  • 5,501 posts

Posted June 09, 2010 - 06:21 PM

Here's some pictures of the brackets you need for the rear lift, the straight bar is for the Vari Drive tractors and the bent one is for the Hydra drive.

:welcome:

Attached Thumbnails

  • masseys 069..jpg
  • masseys 073..jpg
  • masseys 072..jpg
  • masseys 071..jpg
  • masseys 070..jpg


#3 bskip1 OFFLINE  

bskip1

    New Member

  • New Member
  • Member No: 593
  • 0 Thanks
  • 7 posts

Posted June 09, 2010 - 07:10 PM

Thanks for the pictures...could you possibly send me the demensions of the brackets and where the holes need to be drilled

#4 bskip1 OFFLINE  

bskip1

    New Member

  • New Member
  • Member No: 593
  • 0 Thanks
  • 7 posts

Posted June 22, 2010 - 09:46 PM

hey guys does anyone have the demensions for the brackets and the placement of the holes...if someone could lay a tape messure out next to them and take some pics would that be great.

#5 fordmustang1984 OFFLINE  

fordmustang1984

    Tractorholic

  • Senior Member
  • Member No: 27
  • 24 Thanks
  • 428 posts
  • Location: Taunton, Ma

Posted June 22, 2010 - 10:58 PM

There is actually a rough design floating around somewhere. I'll see if I can track it down.

#6 DH1 ONLINE  

DH1

    Electric Tractors

  • Senior Member
  • -GTt Supporter-
  • Contributor
  • Member No: 62
  • 5,100 Thanks
  • 5,501 posts

Posted June 22, 2010 - 11:01 PM

You asked before but I had already installed these brackets on my tractor any way hope this helps. Pictures of the brackets mounted and from before.

The 2 side brackets are mirror images of each other made from 1/4" angle 1 1/4"x1 3/4" with 3- 1/2" holes on one side and 2 holes one the other to match the rear plate. Right side has an extra 1/4" flat bar 2 3/4"x1 1/4", has 3/4" hole one end for the shaft.

Center shaft 3/4" round stock 7 1/4" long 2 arms welded on it 90deg. apart, rear bar 1 1/4" from the end of the shaft, side bar 1/2 from the end.

Rear bar 4 1/2" long 1 1/4" wide 3/8 thick, 1 hole 1/2" dia. 5/8" from the end
Side bar 5" long 1 1/4" wide 3/8 thick, 2 holes 1/2"dia. 3/4" and 2" from end

Pivot 3/4" pipe 1 1/2" long with a 1/4" flat tab welded to it to match the holes on the rear plate.

Attached Thumbnails

  • masseys 091..jpg
  • masseys 092..jpg
  • masseys 093..jpg
  • masseys 094..jpg
  • masseys 095..jpg
  • masseys 096..jpg
  • masseys 097..jpg
  • masseys 098..jpg
  • masseys 099..jpg
  • masseys 069..jpg
  • masseys 073..jpg
  • masseys 072..jpg
  • masseys 071..jpg
  • masseys 070..jpg


#7 bskip1 OFFLINE  

bskip1

    New Member

  • New Member
  • Member No: 593
  • 0 Thanks
  • 7 posts

Posted June 23, 2010 - 10:01 PM

Hey thanks that is exactly what i needed...I should be able to build my lift now.




Top